TAC 200 OTP is a heating compensator complete with optimizer control of the boiler. It can be used for conventional supply temperature control of mixing valve systems for radiator or floor heating. It can also be used for two stage on/off control of gas boilers.
With a room sensor, automatic reset of the supply temperature from the room temperature can be obtained. Great flexibility in adjusting the reset curve – a number of curves are available for each individual application –enables optimum matching to the pertinent heating system. TAC 200 OTP has high and low limits for the supply water temperature.
The controller has a built-in safety function with three stages of frost protection. Reading and adjusting values is easy thanks to a display window and push buttons on the front of the controller.Specifications
Power supply voltage .......... 220-230 V AC ±10%, 50-60Hz
Power consumption ............. 2 VA
Dimensions ........................... 144 x 96 x 96mm (5.7” x 3.8” x 3.8”) Real Time Clock
Accuracy ................................max. dev. 12 min./year at +25 °C (77 º F)
Backup memory ................... 12 hours
Ambient Temperature
Operation ............................... 0 °C to +50 °C (32 ºF to 122 º F)
Storage .................................. –20 °C to +50 °C (-4 ºF to 77 ºF)
Ambient humidity ..................max. 90% RH, non-condensing
Protection .............................. IP 40
Application selection ............DIP switch with 8 switches
Digital Inputs
Quantity .................................. 3
Analog Inputs
Quantity ................................. 3
Thermistor type ....................1800 ohm/25 °C (77 º F)
Relay Outputs
Quantity ................................. 4
Function ................................ making (NO)
Voltage rating .......................max. 250 V AC
Load rating ........................... 2 A, min. 50 mA at 24 V
