> Lighting Control > Switch Actuators > MTN649212,Switch actuator REG-K/12x230/10 with manual mode 
For independent switching of up to 12 loads via make contacts. The function of the switching channels is freely configurable. All switching outlets can be operated manually using push-button operation. With integrated bus coupler. For installation on DIN rails EN 50022.
Bus connection is via bus terminals, a data rail is not necessary. Channel status display via LEDs. A green LED indicates readiness for operation.
KNX software functions: Operation as break contact/make contact. Programmable behaviour for download. Delay functions for each channel. Staircase lighting function with/without manual OFF function. Cut-out warning for staircase lighting function. Scenes. Central function. Disable function. Logic operation or priority control. Status feedback function for each channel.
Power supply:
Nominal voltage: AC 230 V, 50 - 60 Hz
External auxiliary voltage (optional): AC 110 - 240 V, 50 - 60 Hz, max. 2 VA
For each switch output:
Nominal current: 10 A, cosϕ = 1; 10 A, cosϕ = 0.6
Incandescent lamps: AC 230 V, max. 2000 W
Halogen lamps: AC 230 V, max. 1700 W
Fluorescent lamps:AC 230 V, max. 1800 W, uncompensated
AC 230 V, max. 1000 W parallel-compensated
Capacitive load: AC 230 V, max. 105 μF
Device width: 6 modules = approx. 108 mm
Contents: With bus connecting terminal and cable cover.
