> Lighting Control > Switch Actuators > MTN647893,Switch actuator REG-K/8x230/16 with manual mode 
For independent switching of 8 loads via make contacts. All 230 V switch outputs can be operated with manual switches. With integrated bus coupler. For installation on DIN rails EN 50022.
The device is connected to the mains via screw terminals; every second L connection is bridged internally. The bus is connected using a bus connecting terminal; a data rail is not necessary. A green LED indicates readiness for operation after the application has been loaded.
KNX software functions: Operation as break or make contact, delay functions for each channel, staircase lighting function with/without manual OFF function, cut-out warning for staircase lighting function, blocking and additional logic operation or priority control, scenes, status feedback function per channel, central function, comprehensive parameterisation for bus voltage failure and recovery, parameterisable download behaviour.
Nominal voltage: AC 230 V, 50-60 Hz
Per switch contact:
Nominal current: 16 A, cosϕ =0.6
Incandescent lamps: AC 230 V, max. 3600 W
Halogen lamps: AC 230 V, max. 2500 W
Fluorescent lamps: AC 230 V, max. 2500 VA
Capacitive load: AC 230 V, 16 A, max. 200 μF
Device width: 8 modules = approx. 144 mm
Contents: With bus connecting terminal and cable cover.
