0-10V Analogue Output Unit
• Analogue output module, DIN rail mounted
• 4M DIN modules wide
• Requires a 240V a.c. connection
• Dimensions 72mm x 85mm x 65mm
• Can either source or sink current and is used to drive most types of 0-10V electronic dimmable ballasts
• The unit provides 4 independent output channels
• Powered from C-Bus® and requires 18mA at 15 - 36Vdc for correct operation
• The polarity of the signal may be selected so that 0V corresponds to maximum or minimum brightness
• Units draw 18mA from the C-Bus® when mains is not connected
• C-Bus® Learn Enabled.
