> Building Automation > actuator > MVL56FA,3 pos./prop. actuator, 24V, spring r. stem up 
APPLICATION AND USE
MVL actuators have linear characteristic (linear ratio between input signal and valve coupling joint movement). They are used for fluid control in air-conditioning and heating systems and in industrial processes. The control signal can be set as proportional or floating by acting on the dip switches. They are designed for direct coupling on all CONTROLLI globe valves and they may also be used easily on other manufacturers’ valves having different stroke between 0 and 52 mm.All models are fitted with spring return device:spring return with retracted joint (valve stem up)
TECHNICAL CHARACTERISTICS Power supply 24 Vac, +25% / -30% Consumption 25 VA Dimensioning 30 VA Frequency 50...60 Hz Stroke 0...52 mm Stroke time See available models Thrust 700 N Temperature operating -15T 50 °C storage -25T 65°C Allowed room humidity Class R according to DIN 40040 Terminal board screw-type 1,5 mm2 wires N. 2 conduit opening plastic punchable, replaceable by PG 13,5 compression glands Protection degree IP 55 DIN 40050 (IEC 529) For highly polluted environments according to IEC 730-1(93)/6.5.3 Weight 4 Kg Control signal Floating 2 SPST contacts Proportional voltage 0...10V (factory setting), 2...10V/4...7V/8...11V/1...5V/6...9V current see MVLFS5 accessory Output indication G0-Y 2...10 Vdc (max 2 mA) Voltage outside power supply output G0-G1 16 Vdc (max 25 mA)
