> Building Automation > sensor > STC300 0/100,006920041,Contact Temperature Sensor 
Strap on Temperature Transmitters
STC300 is an electronic pipe contact temperature transmitter that converts the temperature measured into an electronic current signal 4-20 mA. The transmitter is delivered as a complete unit, comprising a pipe clamp, the sensing element and an amplifier, mounted in a housing.The sensor and amplifier are encapsulated in separate units, to protect the electronics from excessive heat. A 2m cable connects the two units.
The transmitter element is intended for external mounting directly on pipes, (max diameter 100 mm) e.g. flow and return water pipes.
The transmitter is connected with a 2-wire cable, which serves both as power supply and for signal transmission.
The reading of the measured signal is done over an external load resistance.
Output : 2-Wire, 4-20 mA
Range : 0/100, 0/160, -50/+50 °C
Accuracy : ±0.3 °C at 25 °C
Supply : Min.15Vdc, Max.36Vdc
