> Lighting Control > Binary inputs > MTN682191,light grey,Analogue input REG-K 4-gang 
The analogue input records and processes analogue sensor signals. Up to four analogue sensors can be connected in any combination. In connection with the analogue input module REG/4-gang, 8 analogue inputs are available, to which the connection is made using the sub-bus.
For installation on DIN rails TH35 according to EN 60715.
The bus is connected using a bus connecting terminal; a data rail is not necessary. Evaluation and limit value processing is performed in the analogue input. With continuity checking of the 4 ... 20 mA inputs.
Auxiliary voltage: AC 24 V (+/-10 %)
Analogue inputs: 4
Current interface: 0 ... 20 mA, 4 ... 20 mA
Voltage interface: 0 ... 1 V, 0 ... 10 V
Outputs: DC 24 V, 100 mA
Continuity checking: 4 ... 20 mA
Device width: 4 modules = approx. 72 mm
In KNX, to be completed with: Power supply REG, AC 24 V/1 A MTN663529
Accessories: Analogue input module REG/4‑gang MTN682192, Wind sensor with 0-10 V interface MTN663591, Wind sensor with
0-10 V interface and heating MTN663592, Rain sensor MTN663595, Brightness sensor MTN663593, Twilight sensor MTN663594,
Temperature sensor MTN663596
Contents: With bus connecting terminal and cable cover.
