> Lighting Control > Binary inputs > MTN682291,light grey,Analogue actuator REG-K/4-gang 
The output channels can be parameterised for different current and voltage signals to control different analogue variables (e.g.
servomotors). The actuator has four analogue outputs. For use in connection with the analogue actuator module REG/4-gang, 8
analogue outputs are provided. Connections are made using the sub-bus.
For installation on DIN rails TH35 according to EN 60715.
The bus is connected using a bus connecting terminal; a data rail is not necessary.
With continuity checking of the current outputs.
Auxiliary voltage: AC 24 V (+/-10 %)
Analogue outputs: 4
Current signals: 0 ... 20 mA, 4 ... 20 mA
Voltage signals: 0 ... 1 V, 0.. 10 V
Continuity checking: 4 ... 20 mA
Outputs: DC 24 V, 100 mA (total)
Device width: 4 modules = approx. 72 mm
In KNX, to be completed with: Power supply REG, AC 24 V/1 A MTN663529
Accessories: Analogue actuator module REG/4‑gang MTN682292
Contents: With bus connecting terminal and cable cover.
