> Lighting Control > Binary inputs > MTN682292,light grey,Analogue actuator module REG/4‑gang 
Extension module to extend analogue actuator REG‑K/4-gang from 4 to 8 analogue outputs. Connections are made using the
sub-bus. The output channels can be independently parameterised for different current and voltage signals to control different control
values (e.g. servomotors).
For installation on DIN rails TH35 according to EN 60715.
Auxiliary voltage: AC 24 V (+/-10 %)
Analogue outputs: 4
Current signals: 0 ... 20 mA, 4 ... 20 mA
Voltage signals: 0 ... 1 V, 0.. 10 V (DC)
Continuity checking: 4 ... 20 mA
Outputs: DC 24 V, 100 mA (total)
Device width: 4 modules = approx. 72 mm
In KNX, to be completed with: Analogue actuator REG-K/4-gang MTN682291
Contents: With sub-bus jumper.
