> Lighting Control > Interfaces/gateways > MTN680790,light grey,TeleController Plus REG-K 
The TeleController Plus REG-K connects the telephone network with conventional inputs/outputs and KNX.
Six switch outputs for conventional relays or surge switches.
Six connections, in order to show the current switching status of the surge switch.
Six signal inputs for break or make contacts. The TeleController can forward incoming signals to selected participants.
Up to 20 communication objects for KNX. To control devices or display the statuses.
Connection for an alarm acknowledgement key to reset active messages, for example.
Connection to functionally switch off the TeleController.
This is controlled using a conventional DTMF telephone or a DTMF hand transmitter. Messages are conveyed by announcements, SMS, e-mail or fax to the selected participants. The corresponding texts can be changed with the handset. The device is operated with a rotary knob and is supported by display texts and announcements. The PC software provided enable convenient operation and configuration.
With integrated bus coupler. For installation on DIN rails TH35 according to EN 60715. The bus is connected using screw terminals; a data rail is not necessary.
Power supply: DC 12-24 V
Power consumption: 90 mA at 24 V (open circuit), 790 mA at 24 V (max. load)
Switch outputs: 6, 100 mA at 12 V/24 V
Alarm outputs: 1, 100 mA at 12 V/24 V
Signal inputs: 6, for floating make or break contacts Telephone: Analogue, CTR 21, line length 3 m
KNX: Screw terminals
RS 232: Cable length 3 m
Device width: 8 modules = approx. 144 mm
Accessories: Handset for TeleController MTN660790, Power supply REG, 24 V DC / 0.4 A MTN693003, Power supply REG, 24 V DC / 1.25 A MTN693004
Contents: PC software, connection cable RS 232.
